Products & Services
CARTRIDGES
|
• Celulose/Polyester Blend
• Flame Retardant Cellulose/Polyester Blend
• Spun Bond Polyester
• Ho Treated Spun Bond Polyester
• Aluminized Treated Spun Bond Polyester
• PTFE Spun Bond Polyester
• Polyester Felts
• Fiberglass
• Nomex
|
| Back to top of page |
BAGS (bags)
PLEATED BAGS (bags)
ACCESSORIES
REPLACEMENT PARTS
MULTIWEDGE 45-65 (medium and high efficiency)
|
Fiberbond’s
Multiwedge 45 and 65 filters are made with a tough, high-density
polyester media. It is resistant to high humidity, oil mists, acids,
alkalies and most organic solvents. The high dust capacity makes the
MultiWedge 45 and 65 stand-alone filters.
All perimeter edges
and internal dividers are oermannantly welded together with a heat seal
construction. This dielectric process assures a leak proof
self-supporting pocket that can withstand the most severe environmental
operating conditions.
Features
• Moisture resistant
• 100% synthetic media
• SPOR-AX® antimicrobial incorporated to the fiber
• MultiWedge 45 = MERV 9 and MultiWedge 65 = MERV 11, ASHRAE 52.2
• UL Class II
• 12” and 24” depths
|
|  Back to top of page |
MULTIWEDGE 85-95 (medium and high efficiency)
| Fiberbond’s
MultiWedge 85 and 95 filters act as two filters in one. The pink or
yellow air entering media stops and retains larger particles and the
center micro fine fiber media traps the small particulate. The
self-supporting pockets stay erect at any air flow and heat sealed
perimeter edges and internal dividers eliminate the concern of dust
leakage. The synthetic media used in the fabrication of the MultiWedge
85 and 95 is unaffected by moisture.
Features
• Extended service life
• 100% synthetic media
• Not affected by moisture
• SPOR-AX® antimicrobial is incorporated into the fiber
• MultiWedge 85 = MERV 13 and MultiWedge 95 = MERV 14, ASHRAE 52.2
• 12 ”, 15”, 24” and 30” depths
• UL Class I
|
| Back to top of page |
RIGID-AIR (medium and high efficiency)
|
| Rigid-Air
extended media surface rigid filters are designed for use in most
commercial or industrial HVAC systems where medium to high efficiency
filtration is required.
The filtering medias used for this
filter are synthetic or fiberglass available in ASHRAE efficiencies of
50-55%, 60-65%, 80-85% and 90-95%. These filteres come in standard
dimensions with a depth of 6" and 12".
Features
• Rugged corrosion-resistant steel casing minimizes damage during shipping and handling
• Lofted fiberglass micro-fine or synthetic media is held in position by upstream and downstream plastic or metal pleat supports
• Units are available with or without header
• Filters are completely rigid for start and stop systems
• MERV 10-14, ASHRAE 52.2
|
|
| Back to top of page |
PRECISIONCELL (medium and high efficiency)
| PrecisionCell
extended media separator type rigid filters are fabricated with glass
microfibers and held in place by aluminum separators. Three styles are
available: box, single, and double header. PrecisionCell filters are
available in average efficiency ranges of 60-65%, 80-85% and 90-95% per
ASHRAE Standard 52.1 test methods. They are made for commercial or
industrial use in variable air volume HVAC systems with speeds up to
625 FPM.
Features
• Rugged 24 gauge corrosion resistant steel casing
• Corrugated aluminum separators are moisture-resistant
• Used in applications where filters are located upstream of the supply fan
• Available in standard dimensions with depths of 5 7/8” and 11 1/2”
• UL 900 Class I
• MERV 11 to 14, ASHRAE 52.2
|
| Back to top of page |
PRECISIONCELL GT (medium and high efficiency)
|
The
PrecisionCell GT features extra heavy-duty construction to meet the
rigorous demands of gas turbine rotary machinery air filtration
applications. They may also be utilized where extreme velocity or
turbulence
have rendered other products to be ineffective. PrecisionCell GT
filters are available in ASHRAE efficiencies of 60-65% and 90-95% in
either single or double header versions.
Features
• Dual layer media for increased service life
• Faceguards and grid straps and medis pack stabilizer
• UL 900 Class I
|
| Back to top of page |
PRECISIONCELL II (medium and high efficiency)
|
PrecisionCell
II extended surface minipleat rigid filters are a nominal four inches
deep. They are designed for use in most commercial and industrial HVAC
systems where medium to high efficiency filtration is required. They
are available in average efficiency ranges of 60-65%, 80-85% and 90-95%
per ASHRAE Standard 52.1 atmospheric dust spot test methods.
Two
styles are available: standard box and an optional headered (top and
bottom) version hat are manufactured with a header for use in existing
side access housings with 1” track.
Features
• Available in nominal 65%, 85%, and 95% ASHRAE efficiencies
• Space-saving 4” thickness for installation flexibility
• Rugged moisture-resistant bonded frame and unitized pack for rigidity
• Cartridge design is ideal for VAV systems or turbulent flow conditions to operate at face velocities up to 625 FPM
• Lightweight and easy to store and handle
|
| Back to top of page |
«CJST» STANDARD HOUSING (HOUSINGS)
|
JAS Filtration’s CJST housings are built for use of prefilters and high efficiency final filters.
They are made of 16 gauge galvanized steel with vertical support columns and reinforced with corner gussets.
Doors
come with gaskets inside and quick action pressure retainers. Housings
are sealed by applying a sealer where two metal surfaces are touching.
Filter
tightness is assured are by the use of extruded aluminum rails combined
with positive seal woven nylon pile on the inside vertical flange.
Features
• Made standard with 16 gauge galvanized steel, also available in T-304 stainless steel or aluminum.
• Central columns at maximum every 24" provide increased rigidity and act as a support to the rails
• Corner gussets for increased stability installed upstream of the housing
•
Extruded aluminum rails combined with positive seal woven nylon pile
for efficient sealing available for 2" or 4" prefilters with pocket or
rigid final filters
• Urethane foam armature is installed on the door at the other extremity to eliminate leaks
• Door perimeter comes with flexible neoprene armature, assuring complete sealing when the doors are closed
• The four (4) sides at the front and at the back come with 1" flanges for quick installation
|
|
Back to top of page |
UNI-WASH UC
|
THE BEST IN ITS CLASS
Uni-Wash wet type dust collectors are designed for the capture of wetable and sinkable contaminants. These systems employ a unique, patented five-stage filtration system for scrubbing particulate out of the air and collecting it as wet sludge. Uni-Wash dust collectors are self contained, water recirculating type units for removal of most industrial and foundry dusts from exhaust system air. Dirt, lint, grindings, sanding, finishing dust and other contaminants that do not float in water are all thoroughly washed out and trapped as wet sludge. In many instances, the cleaned air may be returned back into the plant for substantial energy savings. Installation is simple: units are ready for immediate hook-up to water, drain, ducts and electric power. The compact design requires minimum floor space. Shipped in section or fully assembled, depending on size, systems are generally ready for immediate start-up. Water is continuously agitated by the suction of the air through the machine. There are no nozzles, piping or water pumps to clean, repair or replace. The consumption water is easily removed from the sloping tank side through the grating or operational access doors, or through the use of optional automatic sludge removal equipment.
Call us to learn more about the other members of the family of Uni-Wash wet type dust collectors.
Fetaures
• Capture of wetable and sinkable contaminants
• Cleaned air may be returned back into the plant for substantial energy savings
• Ready for immediate hook-up to water, drain, ducts and electric power
|
|
More... Back to top of page |
INTERCEPT
|
INTERCEPT cartridge dust incorporate horizontal, vertical or high pressure designs and utilize a variety of filter media technologies to provide filtration efficiencies to 99.98% down to .5 micron. Cartridge media dust collectors efficiently control airborne particulate caused by most types of industrial processes, including smoke and fume generating applications, as well as powder coating, hand bagging, mixing and grinding applications. The INTERCEPT product line is a comprehensive collection of cartridge collector configurations to suit most industrial process dust applications.
Features
• Filtration efficiencies to 99.98% down to .5 micron
• Control of airborne particulate caused by most types of industrial processes, including smoke and fume generating applications
|
|
More... Back to top of page |
MACHINEMASTER
|
Plant facilities are cleaner, sensitive equipment and controls are protected, and worker comfort and safety are enhanced when a MACHINEMASTER oil and water mist collector system is directly connected to an operation as a source capture device.
MACHINEMASTER systems effectively remove contaminants by drawing them through a vertical upward flow pattern of complex filter stages. Of modular configuration, larger MachineMaster systems are easily installed on self-supporting leg sections next to an existing operation, or they may be wall or ceiling mounted. Gravity assists in continuous drainage of the filter media and allows for longer filter life. MachineMaster systems are available in 2000, 4000, 6000, 8,000 and 12,000 CFM configurations. Varying Motor/Blower Cells, Triple Impinger Cells, HEPA Filter Cells and Carbon Filter Cells will increase efficiency and allow for capture of excessive water/fluid mist, smoke and odors. Built of mild steel and painted inside and out, MachineMaster Mist Collectors provide a total solution for control of oil or water mist pollutants.
Features
• Directly connected to an operation as a source capture device
• Removes contaminants by drawing them through a vertical upward flow pattern of complex filter stages
• Available in 2000, 4000, 6000, 8,000 and 12,000 CFM configurations
• Triple Impinger Cells, HEPA Filter Cells and Carbon Filter Cells will increase efficiency and allow for capture of excessive water/fluid mist, smoke and odors
|
|
More... Back to top of page |
ENVIRO-CELL
| For isolation and capture of fugitive dust, smoke and fumes ENVIRO-CELL environmental work cells are work spaces designed to isolate and capture contaminants where welding, grinding, sanding and mixing operations are conducted. Contaminants are removed from the open production area and contained within the booth. The ENVIRO-CELL eliminates the need for central dust collection systems and provides a clean, safe working environment.
Features
• Isolates and captures fugitive dust, smoke and fumes where welding, grinding, sanding and mixing operations are conducted
|
|
More... Back to top of page |
SIDEKICK (PORTABLE DOWN DRAFT BENCH)
|
QUALITY THAT SPEAKS FOR ITSELF
The SIDEKICK down draft bench is the best little down draft bench available to the industry. It features a vertical cartridge configuration in a heavy gauge self-contained cabinet. The SIDEKICK down draft bench comes equipped with an integral fan and motor assembly, fully contained manual reverse pulse filter cleaning, single door filter cartridge access, and fork slots for portability. Whether you need one station or two, both single and dual bench versions are designed for 300 feet per minute air flow at the bench surface - perfect for all hand tool applications. The SIDEKICK down draft bench is a completely self-contained, ventilation work-station. Put one on your floor, power it up, and go to work!
Features
• Best little down draft bench available to the industry
• Both single and dual bench versions are designed for 300 feet per minute air flow at the bench surface
• Completely self-contained, ventilation work-station
|
|
More... Back to top of page |
SIDEKICK (PORTABLE DUST COLLECTORS)
|
The SIDEKICK dust collector is a MUST-HAVE for welding shops, cutting, brazing and other portable, hand-held operations -- it's even great for a variety of bag dumping and powder handling operations. For processes requiring small, self-contained portable systems, you can't beat the efficiency of a SIDEKICK. The SIDEKICK systems feature higher air volumes and external vacuum pressures than you will get with the competition. These systems are compact, yet available in single or dual cartridge designs. These units feature fully contained reverse pulse filter cleaning. The heavy-duty operational capabilities of the standard, cylindrical SIDEKICK assures exceptional particle removal. Not only does the SIDEKICK provide the exhaust recommended by Federal OSHA standards, but it also provides a fan pressure capable of producing the air volume necessary to maintain proper air filtration when used with extractor SIDE-ARMS or as stationary units hard-piped to local operations. Each SIDEKICK round unit features (1) filter area of 260 sq. feet and square units feature (2) filters at 240 sq. feet. SIDEKICKS also feature direct-drive, spark resistant fan wheels with hinged, single door cartridge access, removable dust drawers, push-button operation, and 15 ft. power cords. IN A WELDING FUME AND SMOKE OPERATION, DON'T BE WITHOUT YOUR SIDEKICK!
Portable SIDEKICK (PSK) Portable Cartridge Dust Collector Systems are available in a variety of configurations, including portable down draft benches. Sidekick systems offer a small footprint in a self-contained work area for source capture of a variety of bag dumping, welding, cutting, brazing or other portable, hand-held operations.
Features
• Higher air volumes and external vacuum pressures than you will get with the competition
• Compact and available in single or dual cartridge designs
• Fully contained reverse pulse filter cleaning assuring exceptional particle removal
• Direct-drive, spark resistant fan wheels with hinged, single door cartridge access, removable dust drawers, push-button operation, and 15 ft. power cords
|
|
More... Back to top of page |
TORNADO CYCLONES
|
TORNADO Cyclone Dust Collectors are high performance, low cost dust collection systems. The collectors separate fine to heavy weight airborne particulate matter from the air stream by converting the single inlet stream into a double vortex confined within the cone shaped collector. Two opposing, spiralling air stream conditions are then created to trap the particulate on the outside of the collector wall, causing the particulate to gravitate downward into the hopper section for disposal. ProVent's TORNADO Model Cyclone Collectors are available for the capture of abrasive particulate, and light or fine particulate with air flotation tendencies. TORNADO Cyclones are standard systems ranging in capability from 440 CFM to 26,400 CFM. Standard features include solid welded, heavy gauge weather resistant construction and reinforced steel legs. The entire system is primed and finished with an industrial acrylic enamel. Optional features include electrical controls, inlet gravity dampers, outlet weather caps, various internal liners and special coatings, hopper slide gates, hopper discharge or product reclamation attachments.
Features
• High performance, low cost dust collection system
• Available for the capture of abrasive particulate, and light or fine particulate with air flotation tendencies
• 440 CFM to 26,400 CFM
• Optional features include electrical controls, inlet gravity dampers, outlet weather caps, various internal liners and special coatings, hopper slide gates, hopper discharge or product reclamation attachments
|
|
More... Back to top of page |
* This section is under construction